PetSafe Microchip Cat Flap Wall Kit – Fits Walls up to 272mm | 4 Tunnel Extensions

The PetSafe Microchip Cat Flap Wall Kit is a complete solution for installing a secure microchip cat flap through thick brick, cavity or insulated walls up to approximately 272mm deep.

Supplied with four 50mm tunnel extensions and a matching glass and wall adaptor, this kit creates a smooth, enclosed passage through the wall while helping protect your cat from exposed masonry, insulation and rough cut edges.

The flap reads your cat’s compatible implanted microchip and unlocks only for registered pets. No collar is required, helping keep stray cats and other unwanted animals outside while giving your own cat safe, independent access.

Complete 272mm Wall Installation Kit

This package includes the main PetSafe Microchip Cat Flap and the components required for a wall installation up to approximately 272mm deep.

• 1 × PetSafe Microchip Cat Flap
• 4 × 50mm Tunnel Extensions
• 1 × PetSafe Glass and Wall Installation Adaptor
• Cutting Template
• Quick Start Guide
• Installation Instructions

Total tunnel depth: Approximately 272mm, made up of the cat flap’s 72mm tunnel and four extensions adding a further 200mm.

Microchip-Controlled Selective Entry

The PetSafe Microchip Cat Flap reads your cat’s compatible FDX-B 15-digit microchip and unlocks only for pets programmed into the flap.

This helps stop neighbouring cats, stray animals and wildlife from entering your home while allowing your own cats to come and go freely.

Stores up to 40 Pets

The system can remember up to 40 registered microchips or compatible RFID collar keys, making it ideal for both single and multi-cat households.

For pets without a compatible implanted microchip, the optional PetSafe RFID Key Fob PAC19-20560 can be programmed to operate the flap.

Secure 4-Way Locking System

The manual locking control gives you complete control over your cat’s access.

• Open Access – Free entry and exit.
• In Only – Your cat can enter but cannot leave.
• Out Only – Your cat can leave but cannot return.
• Fully Locked – Prevents entry and exit.

Designed for Thick Cavity Walls

The four supplied tunnel extensions connect to the cat flap to form a smooth, enclosed route through the wall. This improves the appearance of the installation and helps keep your cat away from exposed brickwork, insulation and sharp edges.

The kit is particularly suitable for:

• Brick walls
• Blockwork walls
• Cavity walls
• Insulated walls
• Timber-framed walls
• Wall depths up to approximately 272mm

Weather-Resistant and Draught-Reducing

The flap includes a draught excluder, weather-resistant seals and a reinforced dual automatic locking mechanism. These features help reduce airflow around the opening while providing reliable everyday security.

Key Features

• Complete microchip cat flap wall kit
• Fits walls up to approximately 272mm thick
• Includes four 50mm tunnel extensions
• Includes PetSafe glass and wall adaptor
• Reads compatible FDX-B 15-digit microchips
• No collar required for microchipped pets
• Stores up to 40 registered pets
• Compatible with optional PetSafe RFID collar keys
• Manual 4-way locking system
• Reinforced dual auto-latch
• Low battery warning indicator
• Draught-reducing weather seal
• Ideal for cavity and insulated wall installations

Product Specifications

• Overall Size: 220mm × 239mm
• Door or Wall Cut-Out: 175mm × 168mm
• Glass Cut-Out: 275mm diameter with adaptor
• Cat Flap Tunnel Depth: 72mm
• Tunnel Extensions: 4 × 50mm
• Maximum Wall Depth: Approximately 272mm
• Maximum Pet Shoulder Width: 150mm
• Maximum Pet Weight: Approximately 8kg
• Microchip Compatibility: FDX-B 15-digit
• Maximum Registered Pets: 40
• Typical Read Range: Approximately 10–12cm

Important Installation Information

The microchip reading distance can be affected by the materials surrounding the flap. Metal, foil-backed insulation and steel reinforcement may reduce scanner performance.

Before cutting into a wall, always check for:

• Electrical cables
• Water or gas pipes
• Structural supports
• Damp-proof membranes
• Insulation materials

The tunnel should be installed level and securely supported to ensure the extensions remain correctly aligned.

Door and Glass Installation

The cat flap can also be fitted into suitable timber, uPVC and metal doors. Where metal reinforcement is present, the supplied adaptor may help improve scanner performance by separating the flap from surrounding metal.

For double-glazed or toughened glass, a new glass unit must be manufactured with the correct opening before installation. Existing sealed or toughened glass cannot normally be cut.

Frequently Asked Questions

How thick a wall will this kit fit?

The cat flap has a tunnel depth of approximately 72mm, and the four supplied extensions add another 200mm, giving a total depth of approximately 272mm.

Can I add more tunnel extensions?

Yes. Additional compatible 50mm tunnel extensions can be added if a deeper wall installation is required.

Will this keep other cats out?

Only registered microchips or programmed PetSafe RFID collar keys can unlock the flap for entry.

How many cats can use the flap?

The system can store up to 40 registered pets.

Does my cat need to wear a collar?

No. A compatible implanted microchip is normally all that is required. An optional RFID collar key can be used for pets without a compatible microchip.

Is this suitable for cavity walls?

Yes. The four included tunnel extensions make the kit ideal for many deep cavity and insulated wall installations up to approximately 272mm.

Why Choose the PetSafe 272mm Wall Kit?

The PetSafe Microchip Cat Flap Wall Kit with four tunnel extensions provides a secure and professional installation through deep walls. It combines selective microchip entry, reliable locking and a fully enclosed tunnel to give your cat safe access while helping protect your home from unwanted animals.

Download the PetSafe Microchip Cat Flap Manual