PetSafe Manual Cat Flap Replacement Flap – PAC54-16752

The PetSafe Manual Cat Flap Replacement Flap PAC54-16752 is a genuine spare flap designed for the PetSafe PPA19-16731 White and PPA19-16732 Brown Manual Cat Flaps.

If your original flap has become cracked, scratched, damaged or discoloured, you don't need to replace the complete cat flap. This genuine replacement allows you to keep the existing frame and simply replace the moving transparent door.

Manufactured from durable, impact-resistant clear plastic, the PAC54-16752 is made specifically for these PetSafe models, ensuring the correct fit and smooth operation.

Fits PetSafe PPA19-16731 & PPA19-16732

This genuine replacement flap is suitable for:

• PetSafe PPA19-16731 Manual Cat Flap – White
• PetSafe PPA19-16732 Manual Cat Flap – Brown

The same replacement flap is used for both colour versions, so it doesn't matter whether the surrounding frame of your existing cat flap is white or brown.

Genuine PetSafe PAC54-16752 Spare Part

This is the genuine PetSafe PAC54-16752 replacement flap, manufactured as a direct replacement for the original moving door.

Using the correct replacement part is important because the flap's dimensions, shape and movement are designed specifically for the original PetSafe frame.

Repair Your Cat Flap Instead of Replacing It

The moving flap is one of the most frequently used parts of any cat door. After years of cats passing through it every day, the transparent plastic can become scratched, cracked or damaged while the main frame remains perfectly usable.

This replacement flap is ideal for:

• Cracked cat flap doors
• Broken or damaged flaps
• Heavily scratched transparent flaps
• Discoloured or tired-looking flaps
• Accidental damage
• Refreshing an otherwise serviceable PetSafe cat flap

Replacement Flap Dimensions

• Width: approximately 146mm
• Height: approximately 135mm
• Material: Clear impact-resistant plastic
• PetSafe Part Number: PAC54-16752
• Compatible Models: PPA19-16731 and PPA19-16732

Important: Dimensions are provided to help with identification. We recommend checking the model or part number of your existing PetSafe cat flap rather than ordering by measurements alone.

Keep Your Existing Cat Flap Installation

If the main frame and locking mechanism of your PetSafe cat flap are still working correctly, replacing only the damaged flap means you can retain the existing installation.

This is particularly useful where the cat flap has already been fitted neatly into a timber door, uPVC panel or other prepared opening.

There is no need to disturb or replace a perfectly serviceable cat flap simply because its transparent moving door has become damaged.

How to Replace the PetSafe Manual Cat Flap

Replacing the flap is relatively straightforward and requires only basic tools.

1. Remove the inner section of the cat flap by undoing the fixing screws.
2. Place the inner frame on a clean, flat surface.
3. Remove the four crosshead screws securing the frame.
4. Carefully separate the frame to access the existing flap.
5. Slide the old or damaged flap out of its position.
6. Position the new replacement flap with the curved edge facing towards the front of the cat flap.
7. Reassemble the frame and tighten the four screws evenly.
8. Refit the cat flap into the existing opening.
9. Check that the new flap swings freely and returns correctly to its resting position.

Key Features

• Genuine PetSafe replacement part
• PetSafe part number PAC54-16752
• Fits PetSafe PPA19-16731
• Fits PetSafe PPA19-16732
• Suitable for white and brown frame versions
• Clear transparent replacement flap
• Impact-resistant plastic construction
• Approximately 146mm wide x 135mm high
• Ideal for cracked or damaged flaps
• Replaces scratched or discoloured doors
• Allows you to retain your existing PetSafe frame
• Simple DIY replacement
• Cost-effective alternative to replacing the complete cat flap

What's Included?

• 1 × Genuine PetSafe PAC54-16752 Replacement Flap

Please Check Your PetSafe Model Before Ordering

PetSafe and Staywell have produced many different cat flaps over the years, and some replacement doors can look very similar in photographs.

Please check that your existing cat flap is model PPA19-16731 or PPA19-16732 before ordering.

If you're unable to identify your existing cat flap, contact CatFlaps.co.uk with a photograph and measurements and we'll be happy to help identify the correct replacement part.

Frequently Asked Questions

What cat flaps does PAC54-16752 fit?

The PAC54-16752 replacement flap is designed for the PetSafe PPA19-16731 White Manual Cat Flap and PPA19-16732 Brown Manual Cat Flap.

Will the same flap fit both the white and brown cat flap?

Yes. The PAC54-16752 transparent replacement flap can be used with both compatible frame colours.

What size is the replacement flap?

The flap measures approximately 146mm wide x 135mm high.

Is this a genuine PetSafe spare part?

Yes. This is a genuine PetSafe replacement flap, part number PAC54-16752.

Can I replace just the transparent flap?

Yes. If the main frame and locking components are still in good working condition, the moving transparent flap can be replaced without purchasing a complete new cat flap.

My flap is badly scratched but isn't broken. Is it worth replacing?

Yes. Replacing a heavily scratched or discoloured flap is an inexpensive way to improve the appearance of an existing cat flap while retaining the original frame.

I'm not sure which PetSafe cat flap I have. Can you help?

Yes. PetSafe and Staywell have produced a large number of cat flap models and replacement parts. If you're unsure, send CatFlaps.co.uk a photograph and measurements of your existing flap and we'll be happy to help identify the correct replacement.

Keep Your PetSafe Cat Flap in Service

A cracked or damaged moving door doesn't mean the complete cat flap needs replacing.

The genuine PetSafe PAC54-16752 replacement flap provides a straightforward and economical repair for compatible PPA19-16731 and PPA19-16732 cat flaps, allowing you to retain the existing frame and installation.